For flat surface
These details are designed for flat surfaces and include furniture feet in various shapes – round, square and rectangular. Fastening can be done with pins, screws, nails or staples.
These details are designed for flat surfaces and include furniture feet in various shapes – round, square and rectangular. Fastening can be done with pins, screws, nails or staples.
With peg. Note: Less suitable for holes where sharp edges and shape variations may occur.
Foot with felt and a pin that keeps the foot in place. Pressed into place for easy installation and simple removal and replacement. Suitable for relatively stationary products. Note: Less suitable for floors with rough surfaces and holes where sharp edges and shape variations may occur.
Foot / stack protection with holes for mounting with screws. Available in several colours and sizes and is suitable for furniture and shop fittings. Note: Screws not included.
High friction bumper and foot for stationary equipment and furniture. Mounted with screws to facilitate renovation. Available in several colours and sizes. Note: Screws not included.
Simple foot with a hole. Mounted with a screw to facilitate renovation. Available in several colours and sizes. Note: Screw not included.
Rectangular foot for flat surfaces with holes for screws. Suitable for chairs. Available in several colours and sizes. Note: Screws not included. 1) Diagonally placed holes.
Small and neat foot for stationary furniture and shop fittings. The foot is held in place with a pin and has a grooved surface underneath. Available in several colors and sizes. Note: Less suitable for holes where sharp edges and shape variations may occur.
A longer foot with two pegs. Suitable for relatively stationary products. Available in several colours and sizes. Note: Less suitable for holes where sharp edges and shape variations may occur. A= Without flanges
Suitable for quite stationery products. With two pegs. Note: Less suitable for concrete, tiled floor and carpet. Less suitable for holes where sharp edges and shape variations may occur. A = Without flanges
Expansion peg. Sheet metal: 0,8-1,2 mm.
Foot with sound-absorbing felt. Suitable for wooden chairs. Available in black and natural, and in several sizes. Note: Pre-drilling is recommended. Less suitable for rough surfaces.
Foot with sound-absorbing felt. Suitable for wooden furniture and mounted with Pozidriv screws. Available in several diameters and the colour options black and natural. Note: Less suitable for rough surfaces.
Round foot with low friction and softer material for a sound-absorbing effect. The edges are rounded to easily slide over carpets. The foot is suitable for wooden chairs and is mounted with nails to sit firmly in place. Pre-drilling is recommended.
Glide with low friction. It reduces the sound somewhat, thanks to a soft material layer and low friction. Rounded corners and edges are great on carpets. With nail.
Nickel plated steel. Without centre nail.
Foot with two embedded nails, for wooden furniture. Available in different shapes, sizes and black or natural.
With embedded sound absorbing felt. Two embedded nails. Note: Less suitable for concrete and tiled floor.
Round foot with low friction and softer material for sound-absorbing effect. The edges are rounded to easily slide over carpets. The foot is suitablel for wooden chairs and is mounted with screws to stay securely in place. Available in several diameters. Screw included.
Glide with screw-hole.The glide reduces the sound somewhat, thanks to a soft material layer and low friction. Rounded corners and edges are great on carpets. Note: To control how good the foot is attached and that the friction feels right, we recommend that you always test before production. Screws included.
Glide. Cautious fastening. High friction. Recommended only in end grain. Not recommended for oak. Note: 1) One ring.
Rail for hanging chairs under tables. Suitable for school environments. Available in two heights. Note: Two parts are required per chair.
Foldable chair link, enabling replacing a chair in the middle of a row without moving the other chairs. The arms have fixed positions in the folded position. Mounted with a screw under the seat. Suitable for conference furniture. Information on testing of connected chairs can be found in EN 14703:2007. Note: 1 pc = One link and two brackets. Screws not included.
Retractable chair connector, attached with screws to the frame below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. The joining brackets can be customised with features such as a logo, unique colour, length, and more. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector with fittings. Screws are not included.
Strong retractable chair connector made of aluminium, attached with screws below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector and two clips. Screws are not included.
Strong retractable chair connector made of aluminium, attached with screws to the frame below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector and two clips. Screws are not included.
Vertical joining bracket for sofas and modular furniture. The brackets are mounted with screws on the side of the furniture and are easily connected by sliding one bracket down through the other. Note: Two pieces are required for each connection point, but the brackets are identical and sold individually. Screws are not included.
Hanging bracket that makes it easy to hang the chair on the table edge to facilitate cleaning. The brackets are mounted under the chair seat and fold in under the seat when not in use. Note: The bracket should be positioned so that the entire arm makes contact with the table surface when the chair is hung. Hanging brackets are sold in pairs.
Hinge for easier operation. Mounted with screws. Note: Should be used in pairs. Screws are not included.
Adjustable foot with expansion solution that keeps the foot securely in place. The foot is designed for furniture and shop fittings made of sheet metal, where the expansion part is fixed into rectangular holes. The screw can be adjusted using an Allen key from both above and below, as well as with a spanner at the foot section. Note: D2 must not exceed 67 mm for the fastening to work.