End fittings for square sections - plugs, caps and foot solutions

With thick, tilted glide surface. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc. The C measurement is given in degrees.

Suitable for horizontal tube. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.

Flexible glide part attached with steel pin. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.

Flexible glide part, with friction surface, attached with steel pin. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.

Adjustable felted glide part, attached with steel pin. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc. Less suitable for concrete and tiled floor.

Flexible plated glide part attached with steel pin. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.

Pyramid-shaped end plug with flanges for square pipes and holes. Suitable for furniture and shop fittings and for deeper holes where sharp edges and shape variations may occur. Available in several sizes. Note: Not suitable for holes in sheet metal etc.

Note: Maximum D1 measurment is with foot screwed-in to half the length of the insert.

Note: Maximum D1 measurment is with foot screwed-in to half the length of the insert. For higher friction add 4 off GS74.5N per foot.

Note: D3=Max

Sturdy plug with threaded hole for square tubes. Intended for tightening fastening as it expands when tightened. Available in several sizes.

Plastic threaded plug. Suitable for light loads on qutie stationery products. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.

Steel threaded plug. Suitable for heavier loads on quite stationery products. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.

Expanding upon tightening. Intended for tightening fastening.

Long steel threaded plug. Suitable for quite heavy loads on mobile products. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.

Long plastic threaded plug. Suitable for light loads on mobile products. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.

Steel threaded plug.

Strengthening of metal

Strengthening of metal.

Tube connector for square tubes. Available in several versions and two tube sizes.

Strengthening of metal.

Conical end cap for square tubes. Available in several colours and sizes.

Suitable for horizontal tube.

These glide caps are discreet, simple and effective when protecting floors and furniture. They have a transparent and flexible cover which adheres well to wooden or steel legs, and they are easy to put on and take off. The felt is gentle on the floor and noise-reducing when furniture is moved. With a metal plate at the bottom of the cover, they are also suitable for steel tube legs without an endcap. The glide caps are available in several sizes and in two variants, round and square. Recommended for people with straight legs Not suitable for use on rough floors.

Cover adjustable feet.