In our wide range of end caps for round tubes and holes, you will find classic straight, angled and practical furniture feet, plug‑in feet and tube wheels. Our furniture feet are available with different glide surfaces that combine function and design. For construction and industrial use, we offer caps, plugs and protective covers in many sizes.
Foot holder for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot holder is mounted straight into the tube and the foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, and is available for several tube dimensions. Used together with PIN-CHP, PIN-CHPF, PIN-CHA, PIN-CHAF, PIN-CHF and PIN-CHFF. The PIN-CH® system is based on being able to easily replace the foot part when it is worn out or when moving a piece of furniture to a different surface. The components are marked to make it easier to find new parts. For best use of the flexible system, PIN-T is installed according to the instructions for PIN-CHA.
Flexible foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, with angles between 0 and 15 degrees. Available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.
Flexible foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, with angles between 0 and 15 degrees. Available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.
Plane foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, and is available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.
Plane foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, and is available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.
Angled foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. The glide has a rotation stop ensuring that the foot part stays in place. Suitable for chairs, among other things, and is available in several angles and sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.
Angled foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. The glide has a rotation stop ensuring that the foot part stays in place. Suitable for chairs, among other things, and is available in several angles and sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.
Angled foot plug with flanges and thicker foot surface. Suitable for chairs with angled legs. Fits several tube dimensions and is suitable for deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
With thick, tilted glide and notch for stacking. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Angled foot plug with low friction. Suitable for furniture with angled legs. Available in several sizes. Has flanges and is suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Low friction noise-reducing foot plug for round tubes. The plug has a thicker foot surface and is available in several sizes. Suitable for chairs with angled legs. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Thick, tilted glide surface with high friction. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Foot with high friction and a peg. Suitable for relatively stationary products. Available in several sizes.
Round foot plug with ridges and a thicker base surface for high friction. The foot plug is suitable for furniture and store fixtures and is available in several sizes. Recommended for use in combination with our Tube Wheels, CS-011. Note: Less suitable for holes where sharp edges and shape variations may occur.
Round foot plug with ridges and thicker foot surface suitable for furniture and shop fittings. Fits several tube dimensions and recommended in combination with our CS-011. Note: Less suitable for holes where sharp edges and shape variations may occur.
Round foot plug with thick, felted surface and flanges. Suitable for furniture and shop fittings where a sound-reducing effect is desired or to protect the floor surface from scratches. Fits several tube dimensions and is suitable for deeper holes where sharp edges and shape variations may occur. Available in several colours. Note: Not suitable for holes in sheet metal etc. Less suitable for rough surfaces.
Foot plug with thicker foot surface and without flanges. Suitable for furniture and shop fittings. Available in several colours and sizes. Note: Less suitable for holes where sharp edges and shape variations may occur.
Round foot plug with flanges and larger foot area. Suitable for furniture and appropriate for deeper holes where sharp edges and shape variations may occur. Available in several colours. Note: Not suitable for holes in sheet metal, etc.
Round foot plug with flanges and thicker foot surface suitable for furniture and shop fittings. Fits several tube dimensions and is suitable for deeper holes where sharp edges and shape variations may occur. Available in several colours. Note: Not suitable for holes in sheet metal etc.
Noise-reducing foot plug with low friction for round tubes. The plug has flanges and comes in several sizes. Suitable for legs where the angle to the floor is 90 degrees. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in metal plates, etc.
Foot plugs with low friction for round tubes. The plug has a thicker foot surface and is available in several sizes. Recommended for chairs. Suitable for tubes and deeper holes where sharp edges and variations in shape may occur. Note: Not suitable for holes in metal sheets, etc.
With thick, tilted glide surface. Whitout flanges. Note: Less suitable for holes where sharp edges and shape variations may occur.
Flexible plated glide part attached with steel pin. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Flexible foot for round tubes. Foot part mounted with steel pin. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Flexible glide part, with friction surface, attached with steel pin. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc. Less suitable for concrete and tiled floor.
With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc. After the glide is assembled, the glide must be bent in 2 directions to release the joint.
Flexible foot plug with felt foot part mounted with steel pins. The foot can be tilted up to 12 degrees and is suitable for chairs with angled legs. Fits several tube dimensions and is suitable for deeper holes where sharp edges and shape variations may occur. Note: Not suitable for rough surfaces or holes in metal.
Flexible foot plug with ball joint that can be angled up to 19 degrees. Suitable for chairs with angled legs. Fits several tube dimensions and has flanges. Suitable for deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Angled foot plug with a thick, felted foot surface. Available in several angles and suitable for chairs with angled legs. Fits various tube dimensions and is appropriate for deeper holes where sharp edges and variations in shape may occur. Note: Less suitable for rough surfaces.
Flexible, felted foot plug with a ball joint that can be tilted up to 19 degrees. Suitable for chairs with angled legs. The plug has flanges and fits multiple tube dimensions. Suitable for deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal, etc. Less suitable for rough surfaces.
Adjustable plated glide part. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Suitable for horizontal tube. Whitout flanges. Note: Less suitable for holes where sharp edges and shape variations may occur.
Suitable for horizontal tube. With Felted glide surface. Whitout flanges. Note: Less suitable for holes where sharp edges and shape variations may occur.
Foot plug with felt for wooden furniture legs. The plug provides a less visible foot compared to, for example, a nail glide. Available in several sizes. Note: The foot plug is pressed into the bottom of the drilled hole. The hole depth therefore determines how much the foot protrudes. Less suitable for rough surfaces.
Foot plug with high friction and a thicker base for wooden furniture legs. The plug provides a less visible foot compared to, for example, a nail glide. Available in several sizes. Note: The foot plug is pressed into the bottom of the drilled hole. The hole depth therefore determines how much the foot protrudes.
Glide in mineralbased plastics. The material is both biodegradable and compostable. Suitable for wooden furniture legs. Provides a less visible foot than for example a nail glide.The glide has a surface with low friction.
Foot plug with high friction and a rounded base for wooden furniture legs. The plug provides a less visible foot compared to, for example, a nail glide. Available in several sizes. Note: The foot plug is pressed into the bottom of the drilled hole. The hole depth therefore determines how much the foot protrudes.
Foot plug with low friction and a thicker base for wooden furniture legs. The plug provides a less visible foot compared to, for example, a nail glide. Available in several sizes. Note: The foot plug is pressed into the bottom of the drilled hole. The hole depth therefore determines how much the foot protrudes.
Glide in mineralbased plastics. The material is both biodegradable and compostable. Suitable for wooden furniture legs. Provides a less visible foot than for example a nail glide. The glide has a surface with low friction. Note: The glide plug should end up in the bottom of the drilled hole. This mean that the hole depth determines how much the glide protrudes.
Glide in bioplastics. The material is both biodegradable and compostable. Suitable for wooden furniture legs. Provides a less visible foot than for example a nail glide. The glide has a surface with low friction. Note: 1. The glide plug should end up in the bottom of the drilled hole. This mean that the hole depth determines how much the glide protrudes. 2. Less suitable for concrete and tiled floor.
Foot plug with low friction and a rounded base for wooden furniture legs. The plug provides a less visible foot compared to, for example, a nail glide. Available in several sizes. Note: The foot plug is pressed into the bottom of the drilled hole. The hole depth therefore determines how much the foot protrudes.
Plug with spring-loaded sides that hold the plug in place but allow for removal without damaging the plug. The plug is suitable for holes in sheet metal and is available in several sizes.
Plug with barbs that ensure it stays in place properly. The plug is suitable for holes in sheet metal and has a low edge that provides an almost edge-free surface. Available in several sizes. It is not possible to pull the plug out of the hole without damaging it, but if you access the back, you can dismantle the plug from there.
Foot-holder for a flexible foot system where the foot part is selected to suit the floor surface. Suitable for chairs and is available for several tube dimensions. The system is a smart interchangeable system built on a fastening system where a foot part with a nail is inserted into the foot holder. Note: Used together with product group PINOCKIO-001B.
Nail it with Ackurat’s combination system PINOCKIO. The system is a clever interchangeable system built on attaching system where a Foot-part with a “pin” is fitted into a Foot-holder. Note: Use together with group PINOCKIO-001A.
Round end plug / tube end with flanges and rounded surface. Fits several tube dimensions and is suitable for deeper holes where sharp edges and shape variations may occur. Available in several colours. Note: Not suitable for holes in sheet metal etc.
Rounded end plug without flanges for round tubes and holes. Suitable for furniture and shop fittings. Available in several colours and sizes. Note: Less suitable for deeper holes where sharp edges and shape variations may occur.
Sleek end plug with a steel surface. The plug has flanges and fits into round tubes and holes. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal, etc.
Round end plug / tube end with flanges. Fits several tube dimensions and is suitable for deeper holes where sharp edges and shape variations may occur. Available in several colours. Note: Not suitable for holes in sheet metal etc.
Round end plug / tube end without flanges. Available in several colours and sizes. Note: Not suitable for holes where sharp edges and shape variations may occur.
End plug with nickel-plated steel for round tubes and holes. The plug has flanges and is available in several sizes. Suitable for deeper holes where sharp edges and variations in shape may occur. Suitable for furniture and shop fittings. Note: Not suitable for holes in sheet metal, etc.
Hemispherical end plug with flanges for round tubes and holes. Suitable for furniture and shop fittings and is suitable for deeper holes where sharp edges and shape variations may occur. Available in several colours and sizes. Note: Not suitable for holes in sheet metal etc.
With round steel surface. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Suitable for tubes and deeper holes where sharp edges and shape variations may occur.
Round plug with a threaded hole. The threads are made of plastic and are suitable for lighter loads and relatively stationary products. Available in several sizes. Note: Less suitable for holes where sharp edges and shape variations may occur.
Long plastic threaded plug. Suitable for light loads on mobile products. With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Plug with steel threaded hole. Suitable for relatively heavy loads on movable products. Available for several tube dimensions and M-threads. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Not suitable for holes in sheet metal etc.
Round, steel-threaded plug with flanges. Suitable for heavier loads on relatively stationary products. Available in several sizes. Note: Not suitable for holes in sheet metal, etc.
Metal insert with a threaded hole for round tubes. Designed to be used with one of our adjustable feet.
Tube Connector.
Expanding upon tightening. Intended for tightening fastening.
Expanding upon tightening. Intended for tightening fastening..
Expanding upon tightening. Intended for tightening fastening.
Expanding upon tightening. Intended for tightening fastening.
Sockets for circlip stem
Suitable for furniture wheels
Universal flange bushing for mounting, and other uses. Available in several sizes, materials and colours. Note: The design of the part that sits in the tube may differ from the picture.
Note: Maximum D2 measurment is with foot screwed-in to half the length of the insert.
Note: Maximum D1 measurment is with foot screwed-in to half the length of the insert.
Note: Maximum D1 measurment is with foot screwed-in to half the length of the insert. For higher friction add 4 off GS74.5N per foot.
Note: Maximum D1 measurment is with foot screwed-in to half the length of the insert. For higher friction add 4 off GS74.5N per foot.
Note: Maximum D1 measurment is with foot screwed-in to half the length of the insert. For higher friction add 4 off GS74.5N per foot.
Note: Maximum D1 measurment is with foot screwed-in to half the length of the insert. For higher friction add 4 off GS74.5N per foot.
Note: Maximum D1 measurment is with foot screwed-in to half the length of the insert.
Dome-shaped foot plug with felted surface and flanges. Ideal for angled furniture legs. The felted surface reduces noise and protects the floors from scratches. Fits multiple tube dimensions and works for deeper holes where sharp edges or shape variations may occur. Note: Not suitable for holes in sheet metal. Not recommended for rough surfaces.
Furniture foot made of felt, for a sound-reducing effect. Suitable for school environments. The cap is made of PET felt, of which 50% is recycled, and it is easy to remove and replace. It is available in black and anthracite grey and can be used for both tube and wooden legs. Note: Tube legs must be plugged before assembly, for example with IC-IF1. Depending on the felt, the appearance may vary slightly.
Furniture foot completely made of felt, for a sound-reducing effect. The foot has an angle for use on slanted legs. Suitable for school environments. The cap is made of PET felt, of which 50% is recycled, and it is easy to remove and replace. It is available in black and anthracite grey and can be used on both tube and wooden legs. Tube legs must be plugged before assembly, for example with IC-IF1. Depending on the felt, the appearance may vary slightly.
Classic foot cap for round tubes. Available in several sizes and colours, and is suitable for furniture and shop fittings.
Classic foot cap with higher friction. Available in several sizes and colours. Suitable as a foot cap for furniture and shop fittings with round tubes.
Classic foot cap with low friction. Available for several tube dimensions and suitable as a foot cap for furniture and shop fittings with round tubes.
Classic foot cap with welded, sound-absorbing felt. Available in several sizes and colours. Suitable for furniture and shop fittings. Note: Less suitable for rough surfaces.
Classic foot cap for angled legs. Available in several sizes and colours, and is ideal as a foot cap for furniture and shop fittings with round tubes.
Angled foot with welded, sound-absorbing felt. Suitable for furniture. Available in several colours and sizes. Note: Less suitable for rough surfaces.
Long and cylindrical.
Tall foot cap with higher friction. Available in several sizes and colours. Suitable as a foot cap for furniture and store fittings with round tubes.
Foot cap with a wider base. Suitable for outdoor furniture that stands on grass or gravel. Available in black and grey, for two tube dimensions.
Suitable for horizontal tube
Note: Less suitable for concrete and tiled floor.
These glide caps are discreet, simple and effective when protecting floors and furniture. They have a transparent and flexible cover which adheres well to wooden or steel legs, and they are easy to put on and take off. The felt is gentle on the floor and noise-reducing when furniture is moved. With a metal plate at the bottom of the cover, they are also suitable for steel tube legs without an endcap. The glide caps are available in several sizes and in two variants, round and square. Recommended for straight legs Not suitable for rough floors.
Round end cap with conical shape.
Suitable for thread protection.
Suitable for thread protection. Soft material.
Suitable for SAE flanges.
Red protective plug/cap for storage and transport purposes. The plug/cap is conical to facilitate assembly and is available in a variety of dimensions.
Suitable for holes in hydraulic connections.
Suitable for water pipes.
Cover adjustable feet.