Connect and assemble
Here you will find chair stacking and fitting bumpers, chair connectors, modular connectors,chair hanging solution, and spacers - solutions for furniture and mounting on flat and round surfaces.
Here you will find chair stacking and fitting bumpers, chair connectors, modular connectors,chair hanging solution, and spacers - solutions for furniture and mounting on flat and round surfaces.
Combined modular fitting and bumper for chair seats. The fittings/bumpers are offered in two materials, where rPE-LD is recycled and the other has slightly higher friction. Adapted for several tube sizes and available in two heights that can be mounted in four different combinations. The fittings are removable, replaceable and recyclable. Purchased individually in the desired size to be combined as needed. For example, 8 pieces are needed for a chair with 4 mounting positions. The fittings can be combined with our Chair Link SCSC-001. rPE-LD = Recycled PE-LD = Higher friction (not recycled)
Retractable chair connector, attached to parallel tubes below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. The joining brackets can be customised with features such as a logo, unique colour, length, and more. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector and two position clips. A small hole must be drilled in the tube for the positioning clips.
Foldable chair link, enabling replacing a chair in the middle of a row without moving the other chairs. The arms have fixed positions in the folded position. Mounted with a screw under the seat. Suitable for conference furniture. Information on testing of connected chairs can be found in EN 14703:2007. Note: 1 pc = One link and two brackets. Screws not included.
Retractable chair connector, attached with screws to the frame below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. The joining brackets can be customised with features such as a logo, unique colour, length, and more. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector with fittings. Screws are not included.
Strong retractable chair connector made of aluminium, attached with screws below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector and two clips. Screws are not included.
Strong retractable chair connector made of aluminium, attached with screws to the frame below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector and two clips. Screws are not included.
Joining brackets for sled-base chairs. Mounted with screws on the underside of the tube.The chairs can be easily linked by aligning the legs in parallel and sliding the brackets together. With a slight lift, the chairs can then be pulled apart. Available for several tube dimensions. Information about testing linked chairs can be found in EN 14703:2007. Note: The brackets are sold in pairs. For a stable connection, two pairs are recommended, one at the front and one at the back. Screws are not included.
Joining brackets with felt for sled-base chairs. Mounted with screws on the underside of the tube. The chairs can be easily linked by aligning the legs in parallel and sliding the brackets together. With a slight lift, the chairs can then be pulled apart. Available for several tube dimensions. Information about testing linked chairs can be found in EN 14703:2007. Note: The brackets are sold in pairs. For a stable connection, two pairs are recommended, one at the front and one at the back. Screws are not included.
Vertical joining bracket for sofas and modular furniture. The brackets are mounted with screws on the side of the furniture and are easily connected by sliding one bracket down through the other. Note: Two pieces are required for each connection point, but the brackets are identical and sold individually. Screws are not included.
Hanging bracket that makes it easy to hang the chair on the table edge to facilitate cleaning. The brackets are mounted under the chair seat and fold in under the seat when not in use. Note: The bracket should be positioned so that the entire arm makes contact with the table surface when the chair is hung. Hanging brackets are sold in pairs.
Rail for hanging chairs under tables. Suitable for school environments. Available in two heights. Note: Two parts are required per chair.
Chair link for parallel legs. Information on the test of linked chairs are available in EN 14703:2007. Note: If you want your pegs that fixates the tubes, select SCSC-DBLT.
Connector for parallel tubes. The fitting has two pins and a twist mechanism that locks the tubes in place. Information on testing linked chairs can be found in EN 14703:2007. Note: Holes must be drilled in the tubes for the pins.
Chair link for parallel legs. Information on the test of linked chairs are available in EN 14703:2007. Note: If you want your pegs that fixates the tubes, select another product. Search for SCSC-DBLT.
Adjustable. Note: Comes complete (two parts).
Chair link. Note: If you want your pegs that fixates the tubes, select SCSC-DBLT.
Chair link for parallel legs. Information on the test of linked chairs are available in EN 14703:2007. Note: If you want your pegs that fixates the tubes, select another product. Search for SCSC-DBLT.
Chair link for parallel flat-oval legs. Information on the test of linked chairs are available in EN 14703:2007. Note: If you want your pegs that fixates the tubes, select another product. Search for SCSC-DBLT.
Saddle washer in polyethylene or nylon. For tougher purposes, the more durable material PA (nylon) is preferable. Mainly used in simpler screw connections on tubes. Aavailable in several colours and dimensions.
Saddle washer/spacers, primarily for use in simple screw joints on parallel tubes.
Plug for soft and hard wood
Hinge for easier operation. Mounted with screws. Note: Should be used in pairs. Screws are not included.