For cabinets and shelves

Here you'll find practical mounting brackets and fixing plugs with threaded holes, with or without nuts for cabinets and shelves.

Connect and Assemble

Filter

ConnectorCLIXTAG 45

Joining bracket for connecting two panels at a 45° angle. Each joint surfaces requires two 4 mm grooves for the brackets. Apply glue to the joint for added stability. The joint can be processed afterwards without risk of damaging tools. For knockdown assembly, insert the bracket from the side into one panel and click it into the other. For a permanent construction, mill the groove as a recess along the length of the bracket. Note: For correct function, C1 must not exceed 2 mm.

ConnectorLOXTAG 45

Joining bracket for connecting two panels at a 45° angle. Each joint surface must include two 4 mm grooves for the brackets. Apply glue to the joint for added stability. The joint can be machined afterwards without risk of damaging tools. For knockdown assembly, insert the bracket from the side into one panel and click it into the other. For a permanent construction, mill the groove as a recess along the length of the bracket. Note: For correct function, C1 must not exceed 2 mm.

Fixing plug IBIP-001

Fixing plug for attaching cabinet backs and other panels. Enables quick and easy assembly and disassembly of furniture. Note: D1 is the recommended hole depth.

HingeSPSP-002

Hinge for easier operation. Mounted with screws. Note: Should be used in pairs. Screws are not included.

HingeSPSP-001

Robust hinge with stainless steel shaft. Suitable as cabinet hinges. Conical recessed screw hole.

Plug with threaded holeIRTH-IPMMH

Metal insert a with threaded hole for horizontal mounting in rectangular cut-outs in sheet metal. Secured with a locking mechanism when fitting an adjustable foot. Designed to be used with one of our adjustable feet.