Go to main content

Unique Ackurat products for round tubes and holes

Silent

PIN-CH® foot holder for tube legs

PIN-T

Foot holder for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot holder is mounted straight into the tube and the foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, and is available for several tube dimensions. Used together with PIN-CHP, PIN-CHPF, PIN-CHA, PIN-CHAF, PIN-CHF and PIN-CHFF. The PIN-CH® system is based on being able to easily replace the foot part when it is worn out or when moving a piece of furniture to a different surface. The components are marked to make it easier to find new parts. For best use of the flexible system, PIN-T is installed according to the instructions for PIN-CHA.

Recycled material
Silent

PIN-CH® foot holder for wooden legs

PIN-W

Foot holder for our flexible PIN-CH® system for wooden legs, where you choose the foot part depending on floor surface and furniture design. The foot holder is mounted straight into the leg and the foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs and other types of furniture. Used together with PIN-CHP, PIN-CHPF, PIN-CHA, PIN-CHAF, PIN-CHF and PIN-CHFF. The PIN-CH® system is based on being able to easily replace the foot part when it is worn out or when moving a piece of furniture to a different surface. The foot parts are marked to make it easier to find new parts.For best use of the flexible system, PIN-W is installed according to the instructions for PIN-CHA.

Sliding
Silent

PIN-CH® foot part for tube and wooden legs – flexible

PIN-CHF

Flexible foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, with angles between 0 and 20 degrees. Available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Silent

PIN-CH® foot part for tube and wooden legs – flexible, felted

PIN-CHFF

Flexible foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, with angles between 0 and 20 degrees. Available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Sliding
Silent

PIN-CH® foot part for tube and wooden legs – flat

PIN-CHP

Plane foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, and is available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Silent

PIN-CH® foot part for tube and wooden legs – flat, felted

PIN-CHPF

Plane foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, and is available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Sliding
Silent

PIN-CH® foot part for tube and wooden legs – angled

PIN-CHA

Angled foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. The glide has a rotation stop ensuring that the foot part stays in place. Suitable for chairs, among other things, and is available in several angles and sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Silent

PIN-CH® foot part for tube and wooden legs – angled, felted

PIN-CHAF

Angled foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. The glide has a rotation stop ensuring that the foot part stays in place. Suitable for chairs, among other things, and is available in several angles and sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Felt glide cap

XCF-004

Furniture foot made of felt, for a sound-reducing effect. Suitable for school environments. The cap is made of PET felt, of which 50% is recycled, and it is easy to remove and replace. It is available in black and anthracite grey and can be used for both tube and wooden legs. Note: Tube legs must be plugged before assembly, for example with IC-IF1. Depending on the felt, the appearance may vary slightly.

Felt glide cap - angled

XCF-005

Furniture foot completely made of felt, for a sound-reducing effect. The foot has an angle for use on slanted legs. Suitable for school environments. The cap is made of PET felt, of which 50% is recycled, and it is easy to remove and replace. It is available in black and anthracite grey and can be used on both tube and wooden legs. Tube legs must be plugged before assembly, for example with IC-IF1. Depending on the felt, the appearance may vary slightly.

Glide cap – conical

XC-UKB1

Classic foot cap for round tubes. Available in several sizes and colours, and is suitable for furniture and shop fittings.

Anti slip

Glide cap with high friction – conical

XC-UKB2

Classic foot cap with higher friction. Available in several sizes and colours. Suitable as a foot cap for furniture and shop fittings with round tubes.

Glide cap – conical, with felt

XC-UKBF

Classic foot cap with welded, sound-absorbing felt. Available in several sizes and colours. Suitable for furniture and shop fittings. Note: Less suitable for rough surfaces.

Glide cap – conical, angled

XC-UFS

Classic foot cap for angled legs. Available in several sizes and colours, and is ideal as a foot cap for furniture and shop fittings with round tubes.

Glide cap with large contact surface

XC-F5022

Foot cap with a wider base. Suitable for outdoor furniture that stands on grass or gravel. Available in black and grey, for two tube dimensions.

Glide plug with ribs

IC-IF3

Round foot plug with ridges and thicker foot surface suitable for furniture and shop fittings. Fits several tube dimensions and recommended in combination with our CS-011. Note: Less suitable for holes where sharp edges and shape variations may occur.

Anti slip

Glide plug with ribs and high friction

IC-IF4

Round foot plug with ridges and a thicker base surface for high friction. The foot plug is suitable for furniture and store fixtures and is available in several sizes. Recommended for use in combination with our Tube Wheels, CS-011. Note: Less suitable for holes where sharp edges and shape variations may occur.

Glide plug – with felt

IC-IFF

Round foot plug with thick, felted surface and flanges. Suitable for furniture and shop fittings where a sound-reducing effect is desired or to protect the floor surface from scratches. Fits several tube dimensions and is suitable for deeper holes where sharp edges and shape variations may occur. Available in several colours. Note: Not suitable for holes in sheet metal etc. Less suitable for rough surfaces.

Sliding

Glide plug for wood with low friction

IC-006

Foot plug with low friction and a thicker base for wooden furniture legs. The plug provides a less visible foot compared to, for example, a nail glide. Available in several sizes. Note: The foot plug is pressed into the bottom of the drilled hole. The hole depth therefore determines how much the foot protrudes.

Glide plug for wood – with felt

IC-007

Foot plug with felt for wooden furniture legs. The plug provides a less visible foot compared to, for example, a nail glide. Available in several sizes. Note: The foot plug is pressed into the bottom of the drilled hole. The hole depth therefore determines how much the foot protrudes. Less suitable for rough surfaces.

Anti slip

Glide plug for wood with high friction

IC-008

Foot plug with high friction and a thicker base for wooden furniture legs. The plug provides a less visible foot compared to, for example, a nail glide. Available in several sizes. Note: The foot plug is pressed into the bottom of the drilled hole. The hole depth therefore determines how much the foot protrudes.

Sliding

Glide plug for wood with low friction – dome shaped

IC-013

Foot plug with low friction and a rounded base for wooden furniture legs. The plug provides a less visible foot compared to, for example, a nail glide. Available in several sizes. Note: The foot plug is pressed into the bottom of the drilled hole. The hole depth therefore determines how much the foot protrudes.

Anti slip

Glide plug for wood with high friction – dome shaped

IC-015

Foot plug with high friction and a rounded base for wooden furniture legs. The plug provides a less visible foot compared to, for example, a nail glide. Available in several sizes. Note: The foot plug is pressed into the bottom of the drilled hole. The hole depth therefore determines how much the foot protrudes.

End cap

XC-UKBH

Round end cap with conical shape.

Anti slip

PIN-CH® foot part for tube and wooden legs – flexible, high friction

PIN-CHFHF

Flexible foot part with friction for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, with angles between 0 and 15 degrees. Available in several sizes.  Used together with foot holders PIN-T (tube) and PIN-W (wood).  The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Unique Ackurat products for flat and round surfaces

PIN-CH® foot holder for cantilever – horizontal tube end

PIN-CS

Horizontal foot holder for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot holder is mounted into the tube and fastened with screws. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs, among other things, and is available for several tube dimensions. Used together with PIN-CHSCRCS and PIN-CHSCRCSF. The PIN-CH® system is based on being able to easily replace the foot part when it is worn out or when moving a piece of furniture to a different surface. The components are marked to make it easier to find new parts.

PIN-CH® foot holder for cantilever – curved tube

PIN-SCR

Horizontal foot holder for our flexible PIN-CH® system for curved tubes, where you choose the foot part depending on floor surface and furniture design. The foot holder is mounted onto the tube and fastened with screws. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs, among other things, and is available for several tube dimensions. Used together with PIN-CHSCRCS and PIN-CHSCRCSF. The PIN-CH® system is based on being able to easily replace the foot part when it is worn out or when moving a piece of furniture to a different surface. The components are marked to make it easier to find new parts.

Sliding

PIN-CH® foot part for cantilever

PIN-CHSCRCS

Rectangular foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs and other furniture with horizontal tubes. Used together with foot holders PIN-SCR and PIN-CS. The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

PIN-CH® foot part for cantilever – felted

PIN-CHSCRCSF

Rectangular foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs and other furniture with horizontal tubes. Used together with foot holders PIN-SCR and PIN-CS. The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

PIN-CH® foot holder for cantilever – horizontal tube, short

PIN-SP

Horizontal foot holder for our flexible PIN-CH® system for straight tubes, where you choose the foot part depending on floor surface and furniture design. The foot holder is mounted onto the tube and  fastened with screws. The  foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs and other types of furniture with horizontal tubes.  Note: To be assembled with flat head screws. Used together with PIN-CHSP and PIN-CHSPF. The PIN-CH® system is based on being able to easily replace the foot part when it is worn out or when moving a piece of furniture to a different surface. The components are marked to make it easier to find new parts.

Sliding

PIN-CH® foot part for cantilever – short

PIN-CHSP

Rectangular foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs and other furniture with horizontal tubes.  Used together with foot holder PIN-SP The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

PIN-CH® foot part for cantilever – short, felted

PIN-CHSPF

Rectangular foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs and other furniture with horizontal tubes.  Used together with foot holder PIN-SP. The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

PIN-CH® foot holder for cantilever – horizontal curved tube

PIN-SR

Horizontal foot holder for our flexible PIN-CH® system for curved tubes, where you choose the foot part depending on floor surface and furniture design. The foot holder is mounted onto the tube and fastened with screws. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs and other types of furniture with horizontal tubes. Note: To be assembled with flat head screws. Used together with PIN-CHSR and PIN-CHSRF. The PIN-CH® system is based on being able to easily replace the foot part when it is worn out or when moving a piece of furniture to a different surface. The components are marked to make it easier to find new parts.

Sliding

PIN-CH® foot part for cantilever – curved

PIN-CHSR

Curved foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs and other furniture with horizontal tubes.  Used together with foot holder PIN-SR. The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

PIN-CH® foot part for sled base chair – curved, felted

PIN-CHSRF

Curved foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs and other furniture with horizontal tubes.  Used together with foot holder PIN-SR. The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Sled base chair glide with screw hole

SC-005

Chair glide for several tube sizes. Mounted with screws to facilitate renovation. Available in transparent polycarbonate or black nylon. Note: Screws not included but works best with flat head screws

Sled base chair glide with screw hole – felted

SC-007

Glide with felt for horizontal tubes of multiple sizes. Mounted with screws to facilitate renovation. Available in transparent polycarbonate or black nylon. Note: Less suitable for floors with a rough surface. Screws not included, but works best with flat head screws

Sled base chair glide for bent tube with screw hole

SC-006

Foot for furniture with curved tubes. Mounted with screws to facilitate renovation. Available for several tube dimensions and comes in black or transparent. Note: Screw not included, but works best with flat head screws

Sled base chair glide for bent tube with screw hole – felted

SC-008

Foot with felt for furniture with curved tubes. Mount with screws to facilitate renovation. Available for several tube dimensions and can be chosen in black nylon or transparent polycarbonate. Note: Less suitable for floors with rough surfaces. Use screws with a flat underside on the screw head. Screws not included.

Glide

SC-STARP

Glide for sled-base chair with anti-rotation pin. Clips on for easy installation and is simple to remove and replace. Available for several tube dimensions. Note: Less suitable for holes where sharp edges and shape variations may occur. Two-step drilling is recommended.

Glide

SC-STARPF

Glide for sled-base chair with felt and anti-rotation pin. Clips on for easy installation and is simple to remove and replace. Available for several tube dimensions. Note: Less suitable for floors with rough surfaces and holes where sharp edges and shape variations may occur. Two-step drilling is recommended.

Foot and stacking protector with screw hole

SP-KUTS1

Foot / stack protection with holes for mounting with screws. Available in several colours and sizes and is suitable for furniture and shop fittings. Note: Screws not included.

Felted furniture glide with pin

SPF-F4410

Foot with felt and a pin that keeps the foot in place. Pressed into place for easy installation and simple removal and replacement. Suitable for relatively stationary products. Note: Less suitable for floors with rough surfaces and holes where sharp edges and shape variations may occur.

Anti slip

PIN-CH® foot part for sled base chair – high friction

PIN-CHSCHF

Rectangular foot part for our flexible PIN-CH® system, where the foot part is selected based on surface and design. The foot part clicks into the foot holder and can be removed with, for example, a screwdriver. Ideal for sled chairs and other furniture with horizontal tubes or wire.  Used together with foot holder PIN-S och PIN-SC. The PIN-CH® system is designed to make it easy to replace the foot part when it becomes worn or when moving a piece of furniture to a different surface. The components are marked to make it easier to find replacement parts.

Recycled material

PIN-CH® foot holder for sled base chair – curved wire/tube

PIN-SC

Horizontal foot holder for our flexible PIN-CH® system for curved tubes or wire, where the foot part is selected based on the surface and design. The foot holder is mounted with a screw, and the foot part clicks into the foot holder and can be removed using, for example, a screwdriver. Ideal for sled chairs and other furniture with horizontal tubes or wire. Note: Install using screws with a flat underside on the screw head. Used together with  PIN-CHSC and PIN-CHSCF. The PIN-CH® system is designed to make it easy to replace the foot part when it becomes worn or when moving a piece of furniture to a different surface. The components are marked to make it easier to find replacement parts. rPA = Recycled

PIN-CH® foot part for sled base chair – felted

PIN-CHSCF

Rectangular foot part with felt for our flexible PIN-CH® system, where the foot part is selected based on surface and design. The foot part clicks into the foot holder and can be removed with, for example, a screwdriver. Suitable for sled chairs and other furniture with horizontal tubes or wire.  Used together with foot holder PIN-S and PIN-SC. The PIN-CH® system is designed to make it easy to replace the foot part when it becomes worn or when moving a piece of furniture to a different surface. The components are marked to make it easier to find replacement parts.

Sliding

PIN-CH® foot part for sled base chair

PIN-CHSC

Rectangular foot part for our flexible PIN-CH® system, where the foot part is selected based on surface and design. The foot part clicks into the foot holder and can be removed with, for example, a screwdriver. Ideal for sled chairs and other furniture with horizontal tubes or wire.  Used together with foot holder PIN-S och PIN-SC. The PIN-CH® system is designed to make it easy to replace the foot part when it becomes worn or when moving a piece of furniture to a different surface. The components are marked to make it easier to find replacement parts.

Recycled material

PIN-CH® foot holder for sled base chair – horizontal wire/tube

PIN-S

Horizontal foot holder for our flexible PIN-CH® system for straight tubes or wire, where the foot part is selected based on the surface and design. The foot holder is mounted with a screw, and the foot part clicks into the foot holder and can be removed using, for example, a screwdriver. ideal for sled chairs and other furniture with horizontal tubes or wire.  Note: Install using screws with a flat underside on the screw head. Used together with PIN-CHSC and PIN-CHSCF. The PIN-CH® system is designed to make it easy to replace the foot part when it becomes worn or when moving a piece of furniture to a different surface. The components are marked to make it easier to find replacement parts. rPA = Recycled

Unique handles and knobs at Ackurat

Click-on-armrest with a matte finish.

Click-on-armrest

KGUP

Click-on-armrest with a matte finish. Just click it on to the armrest! It’s optional to fasten with screws. This armrest is mainly designed to suit closed tubes. It’s available in two lengths and fit five tube dimensions. In addition to the armrest having an elegant design, it's easy to attach and to follow Möbelfakta because it is removable, replaceable, recyclable and protects against skin contact with, for example, chrome.

Armrest for tube ends

KGUH-001

Stylish armrest with a matte and soft surface. Suitable for chairs with armrests with tube ends. Available for several tube dimensions.

Armrest with through hole

KGUH-002

Sleek armrest with a matte and soft surface. Suitable for chairs that have armrests with continuous tubes. Available for multiple tube dimensions.

T-Handle

KGTH-011

Matte pull handle with a moulded-in bushing. Available in several sizes and M-threads.

T-Handle

KGTS-011

Matte pull handle with a moulded-in screw. Available in several sizes, screw lengths, and M-threads.

Knob

KCTS-BRAGA

Ergonomic star knob with a moulded-in screw in galvanized steel. Available in several sizes, screw lengths, and M-threads.

Knob

KCTS-BRAGA A2

Ergonomic star knob with a moulded-in screw in stainless steel. Available in several sizes, screw lengths, and M-threads.

Knob

KCTS-BRAGA SOFT

Ergonomic star knob with an easy-to-grip surface and a moulded-in screw in galvanized steel. Available in several sizes, screw lengths, and M-threads.

Knob

KCTH-BRAGA

Ergonomic star knob with a moulded-in bushing in galvanized steel. Available in several sizes, M-threads, and depths.

Knob

KCTH-BRAGA A2

Ergonomic star knob with a moulded-in bushing in stainless steel. Available in several sizes, M-threads, and depths.

Knob

KCTH-BRAGA SOFT

Ergonomic star knob with an easy-to-grip surface and a moulded-in bushing in galvanized steel. Available in several sizes, M-threads, and depths.

Knob

KCTH-BRAGA-T

Ergonomic star knob with a moulded-in bushing in galvanized steel and a through hole. Available in several sizes, M-threads, and depths.

Recycled material

Knob

KCTS-R4022

Star knob with a press-fitted screw in galvanized steel. Available in several sizes, screw lengths, and M-threads.

Recycled material

Knob

KCTH-R4022

Star knob with a press-fitted bushing in brass. Available with several M-threads.

Recycled material

Knob

KCTS-SR6022

Star knob with a press-fitted screw in galvanized steel. Available in several sizes, screw lengths, and M-threads.

Recycled material

Knob

KCTH-R6022

Star knob with a press-fitted bushing in brass. Available in several M-threads.

Knob

KCHH-R7026

Star knob for hex nut or screw. Available for several nut sizes. Note: Nut/screw not included.

Recycled material

Knob

KCTH-R7026

Star knob with a press-fitted bushing in brass. Available with several M-threads.

Knob

KCTH-R7026-T

Star knob with a press-fitted bushing in brass and a through hole. Available with several M-threads.

Recycled material

Knob

KCTS-R3015

Star knob with a press-fitted screw in galvanized steel. Available with several screw lengths and M-threads.

Recycled material

Knob

KCTH-R3015

Star knob with a press-fitted bushing in brass. Available with several M-threads.

Recycled material

Knob

KCTS-R4018

Star knob with a press-fitted screw in galvanized steel. Available with several screw lengths and M-threads.

Recycled material

Knob

KCTH-R4018

Star knob with a press-fitted brass bushing. Available with several M-threads.

Recycled material

Knob

KCTS-R2215

Knurled knob with press-fitted screw in galvanized steel. Available in several screw lengths and M-threads.

Recycled material

Knob

KCTH-R2215

Knurled knob with press-fitted brass bushing. Available in several M-threads.

Knob

KCTS-R3010

Knurled knob with a moulded-in screw in galvanized steel. Available in several screw lengths and M-threads.

Recycled material

Knob

KCTS-R3525

Knurled knob with press-fitted screw in galvanized steel. Available in several screw lengths and M-threads.

Recycled material

Knob

KCTH-R3525

Knurled knob with a press-fitted brass bushing. Available with several M-threads.

Recycled material

Knob

KCTS-R3

Knurled knob with press-fitted screw in galvanized steel. Available in several screw lengths and M-threads.

Recycled material

Knob

KCTH-R3

Knurled knob with press-fitted brass bushing. Available in several sizes and M-threads.

Knob

KCTS-R177

Knurled knob with a moulded-in screw in galvanized steel. Available in several screw lengths and M-threads.

Knob

KCTH-R177-T

Knurled knob with a through, moulded-in brass bushing. Available in several M-threads.

Knob

KCTS-R1412

Knurled knob with a moulded-in screw in galvanized steel. The knob has a smaller head and a slot for a flat screwdriver. Available in several screw lengths and M-threads.

Knob

KCTH-R1417

Knurled knob with a moulded-in bushing in galvanized steel. The knob has a smaller head and a slot for a flat screwdriver. Available in several M-threads.

Knurled knob with through thread

KCTH-R1417-T

Knurled knob with moulded-in bushing in galvanized steel. The knob has a smaller head with a through bushing. Available in several M-threads.

Knob

KCHH-R3115

Knurled knob for hex nut or screw. Available for several nut sizes. Note: Nut/screw not included.

Knob

KCTH-R3115-T

Knurled knob with press-fitted bushing in galvanized steel and through hole. Available in several M-threads.

Knob

KCHH-R8

Knurled knob for hex nut or screw. Available for several nut sizes. Note: Nut/screw not included.

Knob

KCTH-R8-T

Knurled knob with press-fitted bushing in galvanized steel and through hole. Available in several M-threads.

Recycled material

Wing Knob

WCTS-V1

Wing knob with moulded-in screw in galvanized steel. Available in several screw lengths and M-threads. rPA = Recycled

Recycled material

Wing Knob

WCTH-V1

Wing knob with moulded-in brass bushing. Available in several sizes and M-threads. rPA = Recycled

Wing Knob

WCTH-V10032

Wing knob with moulded-in brass bushing. Available in several M-threads.

Connect and assemble with unique Ackurat products

Anti slip
Recycled material

Stacking

SPSC-DK01

Combined modular fitting and bumper for chair seats. The fittings/bumpers are offered in two materials, where rPE-LD is recycled and the other has slightly higher friction. Adapted for several tube sizes and available in two heights that can be mounted in four different combinations. The fittings are removable, replaceable and recyclable. Purchased individually in the desired size to be combined as needed. For example, 8 pieces are needed for a chair with 4 mounting positions. The fittings can be combined with our Chair Link SCSC-001. rPE-LD = Recycled PE-LD = Higher friction (not recycled)

Expiring

Hook-on fitting

SPAP-001

Hanging bracket that makes it easy to hang the chair on the table edge to facilitate cleaning. The brackets are mounted under the chair seat and fold in under the seat when not in use. Note: The bracket should be positioned so that the entire arm makes contact with the table surface when the chair is hung. Hanging brackets are sold in pairs.

Table connector with snap-lock mechanism

SPSP-KB13

Discreet joining bracket for tables and benches. The brackets are mounted with screws underneath the tabletop and snap together or apart easily by hand. The brackets are flexible and withstand sudden impacts to the tables. Note: Each coupling point requires two parts, but the brackets are identical and sold individually. Screws not included.

Sofa connector

SPSP-KB11

Vertical joining bracket for sofas and modular furniture. The brackets are mounted with screws on the side of the furniture and are easily connected by sliding one bracket down through the other. Note: Two pieces are required for each connection point, but the brackets are identical and sold individually. Screws are not included.

Chair link

SCSC-KBF11

Joining brackets with felt for sled-base chairs. Mounted with screws on the underside of the tube. The chairs can be easily linked by aligning the legs in parallel and sliding the brackets together. With a slight lift, the chairs can then be pulled apart. Available for several tube dimensions. Information about testing linked chairs can be found in EN 14703:2007. Note: The brackets are sold in pairs. For a stable connection, two pairs are recommended, one at the front and one at the back. Screws are not included.

Chair link

SCSC-KB11

Joining brackets for sled-base chairs. Mounted with screws on the underside of the tube.The chairs can be easily linked by aligning the legs in parallel and sliding the brackets together. With a slight lift, the chairs can then be pulled apart. Available for several tube dimensions. Information about testing linked chairs can be found in EN 14703:2007. Note: The brackets are sold in pairs. For a stable connection, two pairs are recommended, one at the front and one at the back. Screws are not included.

Chair link

SCSC-001

Retractable chair connector, attached to parallel tubes below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. The joining brackets can be customised with features such as a logo, unique colour, length, and more. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector and two position clips. A small hole must be drilled in the tube for the positioning clips.

Chair link

SPSP-KB10

Retractable chair connector, attached with screws to the frame below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. The joining brackets can be customised with features such as a logo, unique colour, length, and more. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector with fittings. Screws are not included.

Chair link

SPSP-KB9

Foldable chair link, enabling replacing a chair in the middle of a row without moving the other chairs. The arms have fixed positions in the folded position. Mounted with a screw under the seat. Suitable for conference furniture. Information on testing of connected chairs can be found in EN 14703:2007. Note: 1 pc = One link and two brackets. Screws not included.

Chair link

SPSP-KB6

Strong retractable chair connector made of aluminium, attached with screws below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector and two clips. Screws are not included.

Chair link

SPSP-KB7

Strong retractable chair connector made of aluminium, attached with screws to the frame below the seat. This connector allows a chair in the middle of a row to be replaced without moving the other chairs. The arms lock securely in the retracted position, remaining hidden when not in use. A smart solution for conference and concert venues where many chairs need to be safely linked together. Information on testing linked chairs can be found in EN 14703:2007. Note: 1 piece = One connector and two clips. Screws are not included.

Chair link

SCSC-KB8

Connector for sled-base chairs or other furniture with wire frames. The connector is closed by pressing by hand or with a soft tool, and can be opened again using, for example, a coin. Information on testing linked chairs can be found in EN 14703:2007.

Chair link

SCSC-DBLT

Connector for parallel tubes. The fitting has two pins and a twist mechanism that locks the tubes in place. Information on testing linked chairs can be found in EN 14703:2007. Note: Holes must be drilled in the tubes for the pins.

Seat runner

SPSP-KB12

Rail for hanging chairs under tables. Suitable for school environments. Available in two heights. Note: Two parts are required per chair.

CLIXTAG 45 connector for 45° mitre joints

CLIXTAG 45

Joining bracket for connecting two panels at a 45° angle. Each joint surfaces requires two 4 mm grooves for the brackets. Apply glue to the joint for added stability. The joint can be processed afterwards without risk of damaging tools. For knockdown assembly, insert the bracket from the side into one panel and click it into the other. For a permanent construction, mill the groove as a recess along the length of the bracket. Note: For correct function, C1 must not exceed 2 mm.

LOXTAG 45 Connector for 45° mitre joints

LOXTAG 45

Joining bracket for connecting two panels at a 45° angle. Each joint surface must include two 4 mm grooves for the brackets. Apply glue to the joint for added stability. The joint can be machined afterwards without risk of damaging tools. For knockdown assembly, insert the bracket from the side into one panel and click it into the other. For a permanent construction, mill the groove as a recess along the length of the bracket. Note: For correct function, C1 must not exceed 2 mm.

Plastic hinge

SPSP-002

Hinge for easier operation. Mounted with screws. Note: Should be used in pairs. Screws are not included.

Tube Connector

IQIQ-PB

Tube connector for square tubes. Available in several versions and two tube sizes.

Plug with threaded hole

IRTH-IPMMH

Metal insert a with threaded hole for horizontal mounting in rectangular cut-outs in sheet metal. Secured with a locking mechanism when fitting an adjustable foot. Designed to be used with one of our adjustable feet.

Plug with threaded hole

ICTH-001

Metal insert with a threaded hole for round tubes. Designed to be used with one of our adjustable feet.

Plug with threaded hole

IQTH-IPMM

Metal insert with a threaded hole for square tubes. Designed to be used with one of our adjustable feet.

Plug with threaded hole

IRTH-IPMM

Metal insert with a threaded hole for rectangular tubes. Designed to be used with one of our adjustable feet.

Unique adjustable feet at Ackurat

Adjustable glide

SFSP-SFIPHO

Adjustable foot with expansion solution that keeps the foot securely in place. The foot is designed for furniture and shop fittings made of sheet metal, where the expansion part is fixed into rectangular holes. The screw can be adjusted using an Allen key from both above and below, as well as with a spanner at the foot section. Note: D2 must not exceed 67 mm for the fastening to work.

Adjustable glide

SFIQ-SFIPF011

Adjustable foot for square tubes. Ideal for shelving systems made from steel profiles. The holder section can be easily tapped in with a hammer and clamps securely in place thanks to the slight angle of the wings. The screw can be adjusted with a spanner at the foot section.

Adjustable glide

SFTS-5016

Adjustable foot with a chrome-plated cover. Available in several screw lengths and M-threads. Can be adjusted from underneath using a flat screwdriver.

Adjustable glide

SF-002

Adjustable foot with felt. The foot section has a ribbed edge for better grip. Suitable for furniture and shop fittings. Available in various sizes, screw lengths, and M-threads. Note: Less suitable for rough surfaces.

Adjustable glide

SFTS-208

Adjustable foot with groove for flat chisel on the underside. Easy to remove and replace. Suitable for furniture and shop fittings. Available in several diameters, screw lengths and M threads. With or without radius on the top edge. Note: 1) indicates adjustable feet without radius.

Adjustable glide

SFTS-168

Hexagonal adjustable foot with slot for flat chisel on the underside. Easy to remove and replace. Suitablefor furniture and shop fittings. Available in several sizes, colours, screw lengths and M threads.

Adjustable glide

SFTS-2912

Adjustable foot with a groove for a flat screwdriver on the underside for assembly and disassembly. Suitable for furniture and shop fittings. Available in black and grey and with several screw lengths and M-threads.

Adjustable glide

SFTS-3514

Adjustable foot with a chisel groove on the underside to facilitate assembly and disassembly. Suitable for furniture and shop fittings. Available in several diameters, screw lengths, and M-threads.

Adjustable glide

SFTS-6016

Adjustable foot with a wider base. Suitable for furniture and shop fittings. The foot can be adjusted with a spanner at the foot section. Available in several screw lengths.

Adjustable glide

SFTS-3011

Conical adjustable foot with a slot for a flat screwdriver on the underside. Ideal for furniture and shop fittings. Available in various diameters, screw lengths, and M-threads.

Adjustable glide

SFTS-3515

Adjustable foot with a wider base and a slot for a flat screwdriver underneath. Ideal for furniture and shop fittings. Available in various screw lengths and M-threads.

Adjustable glide

SFTS-5042

Tall adjustable foot with a wider base. Ideal for furniture and shop fittings. Available in various screw lengths and M-threads.

Expiring

Adjustable glide

SFTS-3611

Adjustable foot with grooves for height adjustment using whatever tools are at hand. Ideal for furniture and shop fittings. Available in various screw lengths and M-threads.

Adjustable glide

SFTS-7014

Adjustable foot with a wider base. Ideal for furniture and shop fittings. Available in various diameters, screw lengths, and M-threads. Note: For increased friction on these models, purchase 3 pcs of 330211H per foot.

Anti slip

Adjustable glide

SFTS-003

Adjustable foot with high friction. The nut helps secure the foot and reduce vibration. Ideal for appliances and equipment where vibrations occur.

Adjustable glide

SFTS-3016B

Flexible adjustable foot with a conical base. The screw has hex sockets at both ends for assembly and disassembly. The foot can be adjusted with a spanner at the base.

Adjustable glide

SFTS-3016A

Flexible adjustable foot that can be angled up to 6 degrees. The foot can be mounted with a Phillips screwdriver or a block wrench and is suitable for furniture and shop fittings. Easy to remove and replace. Available in several sizes, M threads and screw lengths. Note: The underside has two different designs, as shown in the picture.

Adjustable glide

SFTS-5012

Adjustable foot in galvanized steel with hexagon socket at both ends and hexagon nut for assembly and disassembly. Flexible screw for angle up to 10 degrees. The bottom plate has screw holes that allow anchoring to the surface. Suitable for shop fittings and industrial applications.

Recycled material

Adjustable glide

SFTS-5025

Flexible adjustable foot with a ball joint and conical base. The screw can be adjusted with a spanner at the base. Available in various diameters, screw lengths, and M-threads. rPA = Recycled

Anti slip
Recycled material

Adjustable glide

SFTS-5028

Flexible adjustable foot with a ball joint and conical base. The foot surface has high friction. The screw can be adjusted with a spanner at the base. Available in various diameters and screw lengths.

Adjustable glide

SFTS-001

Adjustable foot with a cap for larger, round tubes. Height adjustment is made by turning the cap around the tube leg. Ideal for office furniture. Available in various sizes.

Unique clamping levers and locking bolts at Ackurat

Discover unique wheels and rollers from Ackurat

Unique Ackurat products for other tube and hole shapes

Felted glide plug for square profile

IQ-IFRF

Felted foot plug for square tubes. Available in several sizes and are suitable for tubes and deeper holes where sharp edges and shape variations may occur. Note: Less suitable for rough surfaces. Not suitable for holes in sheet metal etc.

End plug

IQ-IFRREGAL

Square end plug / tube end with flanges and open sides for shelf hooks. Suitable for shop fittings and for deeper holes where sharp edges and shape variations may occur. Available in several colours. Note: Not suitable for holes in sheet metal etc.

End plug

IR-REGAL

Rectangular end plug with flanges and open sides for shelf hooks. Suitable for shop fittings and for deeper holes where sharp edges and shape variations may occur. Available in several colours and sizes. Note: Not suitable for holes in sheet metal etc.